Knowledgebase : Technical Support - Rest of the World > Software Drivers and Installation Files

Drivers and interface software for Armagard’s standard and deluxe controller boards.

For all 17" and 21.5" Touchscreen monitors with new 32bit/64bit controller boards.

A New Release of the Drivers available here with the previous versions below.

Mouse Emulation Mode Driver - As this driver emulates a mouse, it does not provide support for vertical scrolling and swiping. If you require this, you should use the touch-mode emulation driver. In some cases, applications may not support touch-mode emulation, therefore, if you are experiencing issues we recommend using the Mouse Emulation Mode Driver.

Touch-mode Emulation Driver - This driver enables the native touch support built into Windows 8 and above. If you require support for vertical scrolling and swiping, please install this driver. Please do be aware that this touchscreen is a single-touch touchscreen and therefore, does not support features requiring multi-touch, such as pinch-to-zoom.

Screen Manufacturer Operating System CPU Architecture Version Controller Download Link
TouchKit

Windows 2000
Windows XP
Windows VISTA
Windows 7
Windows 8
Windows 8.1
Windows 10
Embedded

32/64 bit

5.14.0.15315

Mouse Emulation
Driver

USB Download
TouchKit

Windows 2000
Windows XP
Windows VISTA
Windows 7
Windows 8
Windows 8.1
Windows 10
Embedded

32/64 bit

2.13.0.11202

Touch-Mode Emulation Driver

USB Download

All touchscreens purchased from 01/08/2011 will be fitted with the new controller boards. Any touchscreens purchased before this date will be fitted with the original controller boards unless you've had them upgraded.

Screen Manufacturer Operating System CPU Architecture Version Controller Download Link
TouchKit Windows 7 / 8 32/64 bit 5.10.0.8706 USB Download
TouchKit Windows Vista 32/64 bit 5.0.1.5310 USB Download
TouchKit Windows XP 32 bit 5.0.1.5310 USB Download

For touchscreens purchased before this date, please see this article.

For installation Instructions, please see this article.

If you bought an enclosure before July 2010 use the Digitouch 5.1.9 After July 2010 use the Digitouch 5.1.9.6 versions

For all enclosures bought in 2011 use the eGalax 5.10.0.8706 drivers.

Screen Manufacturer Operating System CPU Architecture Version Controller Download Link
eGalax Windows 7
Vista
32/64 bit 5.10.0.8706 USB Download
DigiTouch 5.1.9.6 XP 32 bit 5.1.9.6 USB Download
DigiTouch 5.1.9.6 Windows 7 32/64 bit 5.1.9.6 USB Download
Keyboard Touchpad Driver - C Windows 32/64 bit Capacitive USB Download
DigiTouch XP
Vista
32 bit 5.1.9 USB / Serial Download
DigiTouch XP
Vista
64 bit 5.1.9 USB / Serial Download
ELO XP
Vista
Windows 7
Windows 2003
32 bit 4.8.7b USB / Serial Download
ELO XP Embeded 32 bit 4.8.7 USB / Serial Download
ELO Windows CE 6.0 32 bit 2.2 USB / Serial Download
ELO Windows CE 5.0 32 bit 2.2 USB / Serial Download
ELO Windows CE 4.2 32 bit 1.14 USB / Serial Download
MicroTouch XP
Vista
Windows 7
32 bit
64 bit
7.13 USB / Serial Download

For installation Instructions, please see this article.

After downloading the software, locate and run the setup file to start the installation.

Follow the on-screen instructions to install the software, ensuring you connect the touchscreen to your computer when instructed.

During the installation, you will have been given the option to calibrate your screen. If you chose to do it at straight away, then you will be prompted to do this after the installation has completed.

NOTE: If your touchscreen is unresponsive after the installation has finished, unplug the USB cable and reconnect it to your computer. The screen should now respond to touch commands.

NOTE: If the calibration screen doesn’t appear straight away, then open the program via the link on your desktop, go to the ‘Tools’ tab and start the calibration from that screen.

Now the touchscreen has been installed and calibrated on your computer. You should also have an icon on the desktop for the configuration application. This allows you to further configure your touchscreen and to re-calibrate the screen should you have the need to.