Touchscreen Driver Installation
Posted by on 03 January 2014 12:30

After downloading the software, locate and run the setup file to start the installation.

Follow the on-screen instructions to install the software, ensuring you connect the touchscreen to your computer when instructed.

During the installation, you will have been given the option to calibrate your screen. If you chose to do it at straight away, then you will be prompted to do this after the installation has completed.

NOTE: If your touchscreen is unresponsive after the installation has finished, unplug the USB cable and reconnect it to your computer. The screen should now respond to touch commands.

NOTE: If the calibration screen doesn’t appear straight away, then open the program via the link on your desktop, go to the ‘Tools’ tab and start the calibration from that screen.

Now the touchscreen has been installed and calibrated on your computer. You should also have an icon on the desktop for the configuration application. This allows you to further configure your touchscreen and to re-calibrate the screen should you have the need to.

(0 vote(s))
Helpful
Not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments:
CAPTCHA Verification 
 
Please complete the below captcha challenge (we use this to prevent automated submissions).